5.
Press
CANCEL
The LCD returns to the Ready screen.
After this setting, the hopper is set at the new
height whenever power is turned on.
Paper separation level
This function sets the power of the brake roller for stabilizing paper separation in picking documents.
LCD display
Paper Separation Level
If the following errors frequently occur, set the braking power as explained below.
• Double feed
• Mis-pick
• SF2 did not detect leading edge of paper
Set "braking power" according to the table below.
Setting
Braking power
Thick
Strong
Medium
Less strong
Thick
Normal
Medium
(factory default)
Medium
Less weak
Thin
Thin
Weak
6-18
three times.
Options
Thick, Medium Thick, Normal, Medium Thin,
Thin (Default: Normal)
"Double feed" frequently occurs. "Mis-pick" or "SF2 ···" frequently occurs.
Make the braking
power stronger.
Ready
Remarks
Thick: strong braking power for thick paper
|
(changes according to paper thickness)
Thin: weak braking power for thin paper
Make the braking
power weaker.