Fujitsu M4099D Operator's Manual page 81

1. In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The "Settings" screen does not appear and
the "Paper Length Check" screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
2. Press repeatedly until "Pre-pick" ap-
pears in the lower line of the menu screen.
3. Press
ENTER
The option select screen appears with the
current setting ON blinking (blinking indicates
"changeable").
4. Press or
The displayed option changes (OFF blinks).
5. Press
ENTER
The LCD returns to the <<SETUP MODE>>
menu screen (Pre-pick).
6. Press
CANCEL
The LCD returns to the Ready screen.
6-36
.
.
to save the change.
two times.
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
Pre-pick
Pre-pick
ON
Pre-pick
OFF
<<SETUP MODE>>
Pre-pick
Ready