Improving Paper Separation
This section explains adjustment for making paper separation stable.
If the following errors frequently occur, make the adjustments explained below.
• Double feed
• Mis-pick
• SF2 did not detect leading edge of paper
Select "Paper Separation Level" in setup mode and adjust the braking power
of the brake roller.
Setting
Braking power
Thick
Strong
Medium
Less strong
Thick
Normal
Medium
(factory default)
Medium
Less weak
Thin
Thin
Weak
Select "Picking Speed" in setup mode and adjust the rotational speed of the
pick roller.
Picking speed
(factory default)
NOTE
Processing of scanning in 200 dpi is reduced when the picking speed is set "Slow".
4-2
frequently occurs.
"Mis-pick" frequently occurs.
Fast
Slow
"Double feed"
Make the braking
power stronger.
Make the picking
speed slow.
"Mis-pick" or "SF2 ···"
frequently occurs.
Make the braking
power weaker.