Setup Mode Lock - Fujitsu M4099D Operator's Manual

Setup mode lock

This function inhibits the operator panel from entering setup mode from normal mode, protecting the
operator panel from misoperation. Once the operator panel is locked, you cannot use the setup items
except those allocated to the
NOTE
You cannot use this function when the setup mode is brought by pressing
status.
LCD display
Setup Mode Lock
To cancel the setup mode lock state, turn off the power and turn on the power while pressing the
button to enter the setup mode. In the setup mode, select the Setup Mode Lock function
MENU
and set the option to OFF.
The following is an example of operation when you use this function.
1. In <<SETUP MODE>> initial screen, press
.
ENTER
The <<SETUP MODE>> menu screen
(Settings or Paper Length Check) appears.
NOTE
The "Settings" screen does not appear and
the "Paper Length Check" screen first ap-
pears when your scanner is not controlled
through the video or TP interface.
2. Press repeatedly until "Setup Mode
Lock" appears in the lower line of the menu
screen.
,
F1 F2
Options
On, Off (Default: Off)
buttons.
, and
F3
Remarks
<<SETUP MODE>>
<<SETUP MODE>>
<<SETUP MODE>>
Paper Length Check
<<SETUP MODE>>
in the Ready
MENU
Settings
Setup Mode Lock
6-45