Scanning Only One Side Of A Document - Fujitsu ScanSnap fi-5110EOX Operator's Manual

Scanning only one side of a document

As the default setting, pushing [SCAN] button
ments in "Duplex" mode. If you wish to start "Simplex" scanning by pressing the [SCAN] button,
please change the settings following the procedure below.
Operation
1. Right click the "ScanSnap Manager" icon
from the menu.
2. Click [Scanning] tab and select [Simplex scan] at [SCAN button:].
3. Click [OK] button to close the window.
4. Load the document onto the scanner.
5. Press the [SCAN] button
The document is scanned in the "Simplex" mode.
To return the setting to the "Duplex" mode, select [Duplex scan] in step 2
HINT
above. The selected setting is applied to further scans unless it will be changed
again.
3.5 Various settings according to your needs
SCAN
on ScanSnap product starts scanning docu-
on the task tray and select "Setting"
S
S
SCAN
.
3