GE GSE23GSESS Use And Care Manual page 26

INSTALLING THE REFRIGERATOR
REPLACE THE BASE GRILLE
7
Replace the grille by installing the two Phillips
head screws.
SET THE CONTROLS
8
Set the controls to the recommended setting.
Installation Instructions
26
(CONT.)
START THE ICEMAKER
9
Set the icemaker power switch to the I (on)
position. The icemaker will not begin to operate
until it reaches its operating temperature of
15°F (–9°C) or below. It will then begin operation
automatically. It will take 2–3 days to fill the ice
bin.
Power
switch
Power
switch
NOTE:
In lower water pressure conditions, the water
valve may turn on up to 3 times to deliver
enough water to the icemaker.