Door Replacement And Adjustment; Troubleshooting - Viking RVER330 Use And Care Manual

Door Replacement and Adjustment

1
Reinstall door to range.
3
Remove pins from hole in hinges.
5
If the door needs to be adjusted, loosen hinge
trim screws (see step 2). Adjust the screws
located between the door and kickplate
using a 5/32" hex head allen wrench. After
adjustment, tighten hinge trim screws.
46
2
1
Open door completely.
Reinstall hinge trim.
4
Close door.

Troubleshooting

Problem Possible Cause and/or Remedy
Range will not function. Range is not connected to electrical power:
Have electrician check power circuit breaker,
wiring, and fuses.
Oven does not operate in Door is not shut tight enough for automatic
self-clean. door latch to lock.
Oven is not clean after self-
Temperature control knob not rotated all the
clean cycle. way past clean until it stops.
Broil does not work. Temperature control knob is rotated too far
past broil position.
Door will not open. Oven is still in self-clean mode. If oven is
hot, door latch will release when safe
temperature is reached.
Oven light will not work. Light bulb is burned out.
Range is not connected to power.
47