Replacing Oven Lights; Door Removal - Viking RVER330 Use And Care Manual

Replacing Oven Lights

WARNING
Disconnect the electric power at the main fuse or
circuit breaker before replacing bulb.
CAUTION
To avoid risk of personal injury,
bare hands. Clean off any signs of oil from the bulb and
handle with a soft cloth.
1. Unsnap glass light cover
using a screwdriver in the
access groove.
access
2. Firmly grasp light bulb and
groove
pull out.
3. Replace with halogen bulb
using volt and wattage
requirements listed on glass
cover.
4. Replace the light cover by
snapping glass cover onto
metal box.
5. Reconnect power at the main
fuse or circuit breaker.
44
touch bulb with
glass light
cover
light
bulb

Door Removal

WARNING
Before removing the doors,
make sure the pins are
properly installed in the
hinges. Failure to do so can
result in personal injury to
hands and/or fingers.
2
Remove hinge trim screws
and hinge trim.
4
Lift door up and out.
45
1
Open door completely.
Place pin in pin hole.
3
Close until pins stop door.