Door Removal; Door Replacement And Adjustment - Viking VDSC530 Use & Care Manual

Door Removal

WARNING
TO PREVENT
PERSONAL INJURY
Before removing the doors,
make sure the pins are properly
installed in the hinges. Failure
to do so can result in personal
injury to hands and/or fingers.

Door Replacement and Adjustment

1
Reinstall door to range.
4
Close door.
1
Open door completely.
Place pin in pin hole.
3
Close until pins stop door.
2
Open door completely.
Reinstall hinge trim.
5
If the door needs to be adjusted, loosen hinge trim screws
located in step 2. Adjust the screws located between the
door and kickplate using a 5/32" hex head allen wrench.
After adjustment, tighten hinge trim screws.
32
2
Remove hinge trim screws
and hinge trim.
4
Lift door up and out.
3
Remove pins from hole in hinges.