Fujitsu M304X Series Oem Manual page 9

Printer specifications .................................... 2 - 2
Table 2.1
Ribbon specifications .....................................
Table 2.2
Electrical specifications ................................. 2 - 3
Table 2.3
Environmental conditions .................................. 2 - 6
Table 2.4
Powered stacker specifications ............................ 2 - 6
Table 2.5
FCT unit specifications ................................... 2 - 9
Table 2.6
Perforation dimensions .................................... 2 - 14
Table 2.7
Recommended bond weight of forms .......................... 2 - 16
Table 2.8
DPC-compatible interface signal lines (Positive logic) .... 4 - 3
Table 4.1
Character (ASCII) and control codes ....................... 4 - 9
Table 4.2
Definition of the start code ................. ..............
Table 4.3
VFU data example .......................................... 4 - 16
Table 4.4
Skip commands .............................................
Table 4.5
Space commands (15-line feed mode) ........................ 4 - 21
Table 4.6
Space commands (63-line feed mode) ........................ 4 - 21
Centronics-compatible interface signal lines ..............
Table 5.1
Character (ASCII) and control codes ....................... 5 - 11
Table 5.2
n-line Skip commands ......................................
Table 5.3
Skip to Channel-n commands ................................ 5 - 18
Table 5.4
RS-232-C interface signal lines ........................... 6 - 1
Table 6.1
Operation by the RTS and CTS combination ..................
Table 6.2
Printer statuses ..........................................
Table 6.3
Character (ASCII) and control codes ....................... 6 - 15
Table 6.4
Commands and their control sequences ...................... 6 - 21
6.5
Printer status ............................................
Table 6.6
TABLES
2 - 3
4 - 13
4 - 20
5 - 3
5 - 17
6 - 7
6 - 9
6 - 28
vii