Table of Contents
Advertisement
6.5 Commands
detecting one of the control sequences listed in Table 6.5, the printer
regards it as a command and starts the comand
Table 6.5 Commands and their control seq'uences
Load FCB (EVFU) Data
Set
to
Initial
Skip to Channel-n
Move Horizontal Position
Space n-lines
Load Horizontal Tab Stop Data
status Fsquesr
status Response
Half
Line
Repeat
Character
Note:
The Load FCB (EVFU) Data command loads forms control data into the forms
The forms control data is channel data.
for channel data.
Pitch
Stare
Feed
P indicates a parameter, and PS indicates a parameter
For their details, refer to the explanations of the
sequence.
commands listed in the table above.
operation.
7-bit mode
24 (PS) IB SC
Channels 1 to 12 can be selected
90 23 (PS) 9C
90 22 (PI 9c
90 24
6 - 21
Advertisement
Table of Contents
