Table of Contents
Advertisement
2.5
Continuous fanfold
The forms must have pin feed holes evenly lined up on both sides and
printers.
horizontal perforations that run perpendicular to the forms feed direction.
See Figure 2.7.
forms specifications:
2.5.1 General note about forms
This section describes paper quality and shape of the forms container.
Paper quality
paper used for forms should be of good quality, opaque, not too elastic,
and suitable for printing.
wrinkles, and tears.
Curled forms es shown in Figure 2.8 will not be fed or stacked correctly
after printing.
forms, single copy or multiple copy, are used for the
Vertical
0 1
perforations
- - A - - - - - - - - - 'O--i
0 I
I
- - - - - - - - - - A - -
0
Figure 2.7 Forms
The paper must also be :free from dirt,
Torn paper can cause printing trouble.
Do not use curled forms.
Perforations
Figure 2.8 Curled forms
Forms width
I
length
Pin feed hole
2 - 11
Advertisement
Table of Contents
