Setup Wizard - NETGEAR RNDU4000-100NAS Software Manual

Setup Wizard

When you launch FrontView for the first time, FrontView launches in Wizard mode. FrontView
also launches in Wizard mode the first time you use your storage system after a factory
default reboot.
NETGEAR recommends using the Setup Wizard the first time you use your storage system.
The Setup Wizard guides you step-by-step through the configuration process, assisting you
in quickly integrating your ReadyNAS storage system into your network. Follow the Setup
Wizard's prompts to configure the following settings:
• Disk configuration. The Setup Wizard configures your system in X-RAID2 mode. For
more information, see
Flex-RAID mode, you can change the configuration after you complete the Setup Wizard.
For more information, see
• Time and date. For more information, see
• Contact email addresses. For more information, see
• IP addresses. For more information, see
• Hostname. For more information, see
• DNS settings. For more information, see
• Administrator password and password recovery question and answer. For more
information, see
• User and group accounts. For more information, see
on page 61.
• File-sharing protocols. For more information, see
• Streaming services. For more information, see
• Shares. For more information, see
• Printers. For more information, see
• Product registration. For more information, see
To switch to Advanced Control mode, click the Switch to Advanced Control button.
ReadyNAS for Home RAIDiator 4.2
X-RAID2 on page 18. If you want to configure your system in
Change from X-RAID2 to Flex-RAID
Administrator Password
Basic Share Concepts
Printer Queue Service
Getting Started
Clock on page 79.
Email Alert Contacts
Ethernet on page 88.
Hostname on page 91.
DNS on page 92.
on page 84.
Basic User and Group Concepts
File-Sharing Protocols
Streaming Services
on page 32.
on page 87.
Register Your System
14
on page 29.
on page 80.
on page 33.
on page 95.
on page 9.