Register Your System
Registration is required before you can use the NETGEAR telephone support service. You
can register your system by clicking the Register button in FrontView or the Setup Wizard, or
by accessing the NETGEAR Product Registration website directly.
To register your system using the NETGEAR Product Registration website:
1.
Locate the serial number on the label of your product.
2.
Using a browser, visit http://www.NETGEAR.com/register.
The product registration web page displays.
If you have never registered a NETGEAR product, click the Continue button.
If you have registered a NETGEAR product in the past, enter your email address and
password and click the Log in button.
3.
Follow the prompts to register your ReadyNAS system.
Diskless Units
If you have a diskless ReadyNAS storage system, you must first install and format at least
one disk before you can use RAIDar or FrontView. For more information, see the ReadyNAS
Ultra, Ultra Plus, NVX, and Pro Series Hardware Manual.
You must use supported disks in your ReadyNAS system. For a list of supported disks, see
http://www.readynas.com/hard_disk_hcl.
ReadyNAS for Home RAIDiator 4.2
Getting Started
9