NETGEAR Rndp200u-100nas Installation Manual

ReadyNAS RAIDiator 4.2 Desktop IG.fm Page 1 Monday, July 25, 2011 12:17 PM
9. Follow the wizard's prompts to configure your unit.
For more information about configuring and managing your ReadyNAS unit, see
the software manual for your storage system. A link to this manual is included on
the Resource CD that came with your unit and is also available at
http://readynas.com/documentation.

Technical Support

After installing your device, locate the serial number on the label of your product
and use it to register your product at
Registration is required before you can use the telephone support service.
NETGEAR strongly recommends using this website to register your product.
For product updates and web support, visit http://readynas.com.
For complete DoC, visit the NETGEAR EU Declarations of Conformity website at
http://support.netgear.com/app/answers/detail/a_id/11621/.
For GNU General Public License (GPL) related information, visit
http://support.netgear.com/app/answers/detail/a_id/2649.
This symbol was placed in accordance with the European Union Directive 2002/96 on the
Waste Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the
European Union, this product should be treated and recycled in accordance with the laws of
your jurisdiction implementing the WEEE Directive.
©2011 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered
trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names
are trademarks or registered trademarks of their respective holders. Information is subject to change
without notice.
http://www.NETGEAR.com/register.
July 2011
ReadyNAS RAIDiator 4.2 Desktop Storage Systems

Package Contents

Thank you for purchasing this NETGEAR product.
You need the following
items from your package
to set up your ReadyNAS
®
unit.
1. ReadyNAS unit
2. Resource CD
3. Power adapter
4. Ethernet cable
For more information
about setting up,
1
configuring, and using
your system, see the
appropriate software and
hardware manuals for
your unit. Links to these
manuals are included on
the Resource CD that
came with your unit and
are also available at http://readynas.com/documentation.
Basic Setup
Follow these instructions to begin using your ReadyNAS unit. These instructions
assume that the unit is using the factory default X-RAID2
and that at least one disk is installed.
Installation Guide
2
3
4
disk configuration
TM