NETGEAR RNDU4000-100NAS Software Manual page 26

5. Enter DELETE VOLUME in the field and click the OK button.
The volume is deleted.
6. Click the Add Volume tab.
The Add Volume screen displays.
7. In the STEP 1 pane, select the check boxes for the disks you want to include in the new
volume.
8. (Optional) Select the Hot Spare check box for any disk that you want to specify as a hot
spare.
For more information, see
9. In the STEP 2 pane, using the Select RAID level drop-down list, assign a RAID level to this
volume.
For more information about RAID levels, see
10. In the STEP 3 pane, enter the maximum size for this volume in the Desired volume size
field.
11. Click the Apply button.
You are prompted to reboot your system.
12. Reboot your system.
13. Use RAIDar to reconnect to your ReadyNAS system.
For more information, see
14. Restore any backed-up data to the reconfigured volume.
For more information, see
ReadyNAS for Home RAIDiator 4.2
Make a Disk a Hot Spare
Flex-RAID
RAIDar on page 10.
Recover Data to Your ReadyNAS System
Disk Configuration
26
on page 21.
on page 19.
on page 134.