Install Previously Downloaded Add-Ons
If you download add-ons directly to your ReadyNAS system without using the FrontView
interface, you must use FrontView to install them.
To install previously downloaded add-ons:
1.
Select Add-ons > Add New from the FrontView main menu.
2.
Browse to the add-on you want to upload.
3.
Click the Upload and verify image button.
In a moment, you are prompted to confirm the upload command.
4.
Confirm the upload command.
The add-on is installed. Some add-ons require you to reboot your ReadyNAS system to
complete the installation.
USB Storage Devices
You can connect USB disk and flash drives to your ReadyNAS system and use FrontView to
manage them.
USB storage devices can be divided into partitions. Partitions on the storage devices must be
formatted in one of the following file system formats:
•
FAT32
•
NTFS
•
EXT2
•
EXT3
USB volume name and share access settings are persistent across mounts. The ReadyNAS
attempts to remember the name as long as a unique ID is associated with the USB device so
that the next time the device is connected, the same share name or names are available.
Share access restrictions are saved even after the unit is disconnected.
Even when access authorization is based on user login, files on a USB device are saved with
User ID 0, regardless of the user account. This allows easy sharing of the USB device with
other network storage and PC systems.
ReadyNAS for Home RAIDiator 4.2
System Settings
99