Change From X-Raid2 To Flex-Raid - NETGEAR RNDU4000-100NAS Software Manual

Change from X-RAID2 to Flex-RAID

You can reconfigure your system from X-RAID2 mode (the factory default mode) to
Flex-RAID mode.

To change from X-RAID2 to Flex-RAID:
1. If any data is stored on your system, back up your data.
For more information, see the
page 130.
2. Perform a factory reset reboot.
WARNING!
Setting your ReadyNAS system to its factory defaults erases all
data and configuration settings.
The process for performing a factory reset reboot varies by storage system. For more
information about how to perform a factory reset reboot, see the ReadyNAS Ultra, Ultra
Plus, NVX, and Pro Series Hardware Manual.
During the factory reboot process, you have a 10-minute window to choose a RAID
configuration. RAIDar sends a prompt to click the Setup button during this 10-minute time
frame.
3. Launch RAIDar, highlight your storage system, and click the Setup button.
The ReadyNAS Volume Setup screen displays.
ReadyNAS for Home RAIDiator 4.2
Back Up Data Stored On Your ReadyNAS System
Disk Configuration
29
on