NETGEAR RNDU4000-100NAS Software Manual page 40

4. (Optional) Enter any access restrictions that you want to enforce.
This example shows share access restrictions for the CIFS and Rsync file-sharing
protocols. Share access restriction options vary by protocol.
• CIFS options:
• Hosts Allowed Access. Select this check box and enter the IP addresses of any
hosts allowed to access this share using this protocol.
If you do not select this check box and enter at least one IP address, no hosts are
barred from accessing this share using this protocol.
• Read-only users. Select this check box and enter the names of any users that are
allowed read-only access this share using this protocol.
If you do not select this check box and enter at least one user name, no users are
barred from read-only access to this share using this protocol.
• Read-only groups. Select this check box and enter the names of any groups that
are allowed read-only access this share using this protocol.
If you do not select this check box and enter at least one group name, no groups
are barred from read-only access to this share using this protocol.
• Write-enabled users. Select this check box and enter the names of any users who
are allowed write-enabled access to this share using this protocol.
If you do not select this check box and enter at least group name, no groups are
barred from write-enabled access to this share using this protocol.
• Write-enabled group. Select this check box and enter the names of any groups
who are allowed write-enabled access to this share using this protocol.
If you do not select this check box and enter at least group name, no groups are
barred from write-enabled access to this share using this protocol.
• Allow guest access. Select this check box to allow people who do not have user
accounts to access your system.
• Rsync options:
• Hosts Allowed Access. Select this check box and enter the IP addresses of any
hosts allowed to access this share using this protocol.
If you do not select this check box and enter at least one IP address, no hosts are
barred from accessing this share using this protocol.
• Enable Password Protect. Select this check box and create at least one Rsync
user account and password. You can create a maximum of two Rsync user
accounts and passwords for each share. These credentials are completely
separate from your ReadyNAS storage system's user accounts.
ReadyNAS for Home RAIDiator 4.2
Shares
40