Initial Setup; Check Package Contents - NETGEAR MS2110-100NAS User Manual

Initial Setup

NETGEAR Stora works with both Macintosh and PC computers and comes complete with
everything you need to connect it to your network. An electronic copy of the installation guide
is also located on the product CD as well as on the NETGEAR web site at http://netgear.com.
To setup your Stora, complete these steps:
1. "Check Package Contents" on page 14.
2. "Connect Stora to your Network" on page 15.
3. "Configure your Stora" on page 16.

Check Package Contents

1. Unpack the unit and check package
contents.
Before starting installation, unpack the
unit and check your package contents
to be sure all components are
available:
• Stora unit
• Power cable
• Ethernet cable
• Installation Guide
• Stora Resource CD, which
includes:
- Stora software applications
- Warranty Information
- Worldwide Customer Support
Note: If you purchased a Stora unit with only one disk, and want to add a
second disk for redundancy, NETGEAR suggests that you install
your Stora, then connect Stora to your network and validate the
installation before adding the disk. See "Installing a Disk" on page 24
for installation instructions.
14 | Chapter 1: Getting Acquainted
NETGEAR Stora User Manual
Figure 4 Package Contents