Printer Queue Service; System Shutdown - NETGEAR RNDU4000-100NAS Software Manual

Printer Queue Service

You can connect a printer to your ReadyNAS system and share it across your local area
network. Your ReadyNAS system supports single-function USB printers.

To connect a printer:
1. Connect a USB cable from a single-function USB printer to a USB port on your
ReadyNAS system.
For more information about the USB ports on your ReadyNAS system, see the
ReadyNAS Ultra, Ultra Plus, NVX, and Pro Series Hardware Manual.
2. Power on the printer.
3. Select Printer > Printer Queue Service from the FrontView main menu.
The Printer screen displays showing the printer you connected.

System Shutdown

Use FrontView to gracefully shut down your ReadyNAS storage system. When you reboot
your system, you must close the browser window and use RAIDar to reconnect to FrontView.

To gracefully shut down your system:
1. Select System > Shutdown from the FrontView main menu.
The Shutdown Options screen displays.
2. Choose a shutdown option:
• Select the Shutdown and turn off device radio button to shut down your system.
• Select the Shutdown and reboot device radio button to shut down your system and
automatically reboot it.
3. (Optional) Select the Perform volume scan on next boot check box.
You do not need to select this option unless you suspect data integrity problems. This can
take more than an hour depending on your disk capacity and content.
4. (Optional) Select the Check and fix quotas on next boot check box.
You do not need to select this option unless you suspect quota problems. This can take
more than an hour depending on your disk capacity and content.
ReadyNAS for Home RAIDiator 4.2
System Settings
87