Removing The Memory Module Cover; Memory Module - Dell Inspiron X200 Service Manual

Back to Contents Page
Memory Module and Mini PCI Card
Dell™ X200 Service Manual
Memory Module
Mini PCI Card

Memory Module

Removing the Memory Module Cover

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the
1. If the computer is docked, undock it.
2. Turn the computer over, loosen the captive screw from the memory module cover, and lift the cover.
1 captive screw
2 memory module cover
Removing the Memory Module
NOTICE: To prevent damage to the memory module connector, do not use tools to spread the inner metal tabs that secure the memory module.
NOTICE: Handle memory modules by their edges, and do not touch the components on a module.
1. Use your fingertips to spread apart the securing clips on each end of the memory module connector.
The module should pop up.
2. Remove the module from the connector.
1 memory module
Computer" before performing the following procedure.