Download  Print this page

Dell Latitude X200 Service Manual

Hide thumbs

Advertisement

Thank you for purchasing this Factory Service
Manual CD/DVD from servicemanuals4u.com.
Please check out our eBay auctions for more great
deals on Factory Service Manuals:
servicemanuals4u

Advertisement

loading

  Related Manuals for Dell Latitude X200

  Summary of Contents for Dell Latitude X200

  • Page 1 Thank you for purchasing this Factory Service Manual CD/DVD from servicemanuals4u.com. Please check out our eBay auctions for more great deals on Factory Service Manuals: servicemanuals4u...
  • Page 2 Dell Latitude X200 Service Manual Dell™ Latitude™ X200 Service Manual Before You Begin Preparing to Work Inside the Computer Recommended Tools Computer Orientation Screw Identification System Components Battery Memory Module and Mini PCI Card Memory Module Mini PCI Card Keyboard...
  • Page 3 Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden. Trademarks used in this text: Dell, the DELL logo, AccessDirect, and Latitude are trademarks of Dell Computer Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
  • Page 4: Before You Begin

    NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. NOTICE: To avoid damaging the computer, perform the following steps before you begin working inside the computer.
  • Page 5: Recommended Tools

    Before You Begin: Dell Latitude X200 Service Manual 9. Close the display and turn the computer upside down on a flat work surface. NOTICE: To avoid damaging the system board, you must remove the battery before you service the computer.
  • Page 6: Screw Identification

    Before You Begin: Dell Latitude X200 Service Manual back right front left Screw Identification When you are removing and replacing components, photocopy the placemat as a tool to lay out and keep track of the screws. The placemat provides the number of screws and their sizes.
  • Page 7 Before You Begin: Dell Latitude X200 Service Manual NOTICE: When reinstalling a screw, you must use a screw of the correct diameter and length. Ensure that the screw is properly aligned with its corresponding hole, and avoid overtightening. Keyboard: Palm Rest:...
  • Page 8: Hard Drive

    Before You Begin: Dell Latitude X200 Service Manual Hard Drive: System Board: (3 each) (4 each) Modem Daughter Card: Cooling Fan: (1 each) (4 each) Speaker: (1 each) Back to Contents Page file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...ok/Latitude/X200/X200_SERVICE_MANUAL/begin.htm (5 of 6)6/21/2004 3:03:08 AM...
  • Page 9 Before You Begin: Dell Latitude X200 Service Manual file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...ok/Latitude/X200/X200_SERVICE_MANUAL/begin.htm (6 of 6)6/21/2004 3:03:08 AM...
  • Page 10: System Components

    NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. NOTICE: Unless otherwise noted, each procedure in this manual assumes that a part can be replaced by performing the removal procedure in reverse order.
  • Page 11: Table Of Contents

    System Components: Dell Latitude X200 Service Manual 1 display battery 2 keyboard bottom case 3 keyboard tray 10 memory module cover 4 cooling fan 11 Mini PCI card cover 5 system board 12 reserve battery 6 modem daughter card 13 speakers (2)
  • Page 12: Removing The Battery

    Battery: Dell Latitude X200 Service Manual Back to Contents Page Battery Dell™ Latitude™ X200 Service Manual Removing the Battery NOTICE: If you choose to replace the battery with the computer in standby mode, you have up to 1 minute to complete the battery replacement before the computer shuts down and loses any unsaved data.
  • Page 13: Replacing The Battery

    Replacing the Battery CAUTION: Use only Dell™ battery modules that are approved for use with this computer. Use of other types may increase the risk of fire or explosion. 1. Slide the battery into the bay until the latch release clicks.
  • Page 14 Battery: Dell Latitude X200 Service Manual file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/X200/X200_SERVICE_MANUAL/battery.htm (3 of 3)6/21/2004 3:03:10 AM...
  • Page 15: Memory Module

    Memory Module and Mini PCI Card: Dell Latitude X200 Service Manual Back to Contents Page Memory Module and Mini PCI Card Dell™ Latitude™ X200 Service Manual Memory Module Mini PCI Card Memory Module Removing the Memory Module Cover NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
  • Page 16: Removing The Memory Module

    Memory Module and Mini PCI Card: Dell Latitude X200 Service Manual captive screw memory module cover Removing the Memory Module NOTICE: To prevent damage to the memory module connector, do not use tools to spread the inner metal tabs that secure the memory module.
  • Page 17: Replacing The Memory Module

    Memory Module and Mini PCI Card: Dell Latitude X200 Service Manual memory module securing clips (2) Replacing the Memory Module 1. Ground yourself and install the new memory module: a. Align the notch in the module with the slot in the center of the connector.
  • Page 18 Memory Module and Mini PCI Card: Dell Latitude X200 Service Manual 2. Replace the memory module cover and tighten the captive screw. NOTICE: If the memory module cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.
  • Page 19: Mini Pci Card

    Memory Module and Mini PCI Card: Dell Latitude X200 Service Manual memory module cover 3. Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet. 4. Turn on the computer. As the computer boots, it detects the additional memory and automatically updates the system configuration information.
  • Page 20: Removing The Mini Pci Card

    Memory Module and Mini PCI Card: Dell Latitude X200 Service Manual captive screw Mini PCI card cover Removing the Mini PCI Card 1. Disconnect the antenna cable from the Mini PCI card. 2. Release the Mini PCI card by spreading the metal securing tabs until the card pops up slightly.
  • Page 21: Replacing The Mini Pci Card

    Memory Module and Mini PCI Card: Dell Latitude X200 Service Manual Replacing the Mini PCI Card 1. Align the Mini PCI card with the connector at a 45-degree angle, and press the Mini PCI card into the connector. 2. Connect the antenna cable to the antenna connector on the Mini PCI card.
  • Page 22 Memory Module and Mini PCI Card: Dell Latitude X200 Service Manual file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...Latitude/X200/X200_SERVICE_MANUAL/upgrades.htm (8 of 8)6/21/2004 3:03:11 AM...
  • Page 23: Removing The Keyboard

    Keyboard: Dell Latitude X200 Service Manual Back to Contents Page Keyboard Dell™ Latitude™ X200 Service Manual Removing the Keyboard NOTICE: Disconnect the computer and any attached devices from electrical outlets. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
  • Page 24 Keyboard: Dell Latitude X200 Service Manual M2 x 4-mm screws (6) NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time- consuming to replace. Be careful when removing and handling the keyboard. 3. Turn the computer over, and insert a ¼-inch flat-blade screwdriver into the slot to the right of the keyboard locator tab.
  • Page 25 Keyboard: Dell Latitude X200 Service Manual 1 keyboard locator tab 2 keyboard securing tabs (4) 4. Pry up the keyboard locator tab, and the keyboard pops up. 5. Pull the keyboard a small distance toward the front of the computer to release the four securing...
  • Page 26: Replacing The Keyboard

    Keyboard: Dell Latitude X200 Service Manual tabs located across the back edge of the keyboard. 6. Rotate the keyboard toward the front of the computer and place it face-down on the palm rest. NOTICE: Do not pull on the keyboard flex cable.
  • Page 27 Keyboard: Dell Latitude X200 Service Manual NOTICE: To avoid damage to the connector pins, insert the keyboard flex cable evenly into the ZIF connector on the system board, and do not reverse the keyboard flex cable. 2. Ensure that the ZIF connector is open by pulling the ZIF connector tabs toward the back of the computer.
  • Page 28: Palm Rest

    Palm Rest: Dell Latitude X200 Service Manual Back to Contents Page Palm Rest Dell™ Latitude™ X200 Service Manual Removing the Palm Rest NOTICE: Disconnect the computer and any attached devices from electrical outlets. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
  • Page 29 Palm Rest: Dell Latitude X200 Service Manual M2 x 4-mm screws (4) 4. Turn the computer over, and open the display (if you have not already removed the display). 5. Lift the back edge of the palm rest, and rotate the palm rest forward.
  • Page 30: Replacing The Palm Rest

    Palm Rest: Dell Latitude X200 Service Manual palm-rest flex cable ZIF connector 7. Lift the palm rest up and out of the computer. Replacing the Palm Rest To aid with proper flex cable connection, a blue locator line has been added near the end of the palm- rest flex cable.
  • Page 31: Removing The Hard Drive

    Hard Drive: Dell Latitude X200 Service Manual Back to Contents Page Hard Drive Dell™ Latitude™ X200 Service Manual Removing the Hard Drive NOTICE: Disconnect the computer and any attached devices from electrical outlets. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
  • Page 32 Hard Drive: Dell Latitude X200 Service Manual hard drive M2 x 5.5-mm screws (3) hard drive connector 5. Disconnect the hard drive connector from the system board. 6. Lift the hard drive up and out of the bottom case. Back to Contents Page...
  • Page 33: Hinge Covers

    Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual Back to Contents Page Hinge Covers and Display Assembly Dell™ Latitude™ X200 Service Manual Hinge Covers Display Assembly Hinge Covers Removing the Hinge Covers 1. Remove the battery. 2. On the inside of the battery bay, use your fingers to unhook the hinge covers from the back of the computer.
  • Page 34: Replacing The Hinge Covers

    2. Place the hinge covers over the display hinges: a. The left hinge cover fits over the power button and the right hinge cover fits over the Dell™ AccessDirect™ button. Both hinge covers pass through the display hinges to the back of the computer.
  • Page 35 Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual M2 x 6-mm screws (2) 4. Turn the computer over, and remove the two M3 x 5-mm screws from the bottom of the computer. file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/X200/X200_SERVICE_MANUAL/display.htm (3 of 6)6/21/2004 3:03:16 AM...
  • Page 36 Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual M3 x 5-mm screws (2) 5. Turn the computer over, and open the display 180 degrees. 6. Disconnect the antenna connector. file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/X200/X200_SERVICE_MANUAL/display.htm (4 of 6)6/21/2004 3:03:16 AM...
  • Page 37 Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual NOTICE: Do not pull on the signal cable and inverter cable. Pull from the signal connector and inverter connector to disconnect the cables. 7. Disconnect the signal cable from the system board.
  • Page 38: Inverter Cable

    Hinge Covers and Display Assembly: Dell Latitude X200 Service Manual signal cable inverter cable inverter connector signal connector 9. Move the display assembly to an upright position and pull it up out of the bottom case. Back to Contents Page...
  • Page 39: Keyboard Tray

    Keyboard Tray: Dell Latitude X200 Service Manual Back to Contents Page Keyboard Tray Dell™ Latitude™ X200 Service Manual Removing the Keyboard Tray NOTICE: Disconnect the computer and any attached devices from electrical outlets. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
  • Page 40 Keyboard Tray: Dell Latitude X200 Service Manual keyboard tray M2 x 4-mm screws (7) 7. Lift the keyboard tray up and out of the bottom case. NOTE: The air vent on the right side of the computer comes loose when the keyboard tray is removed.
  • Page 41 Keyboard Tray: Dell Latitude X200 Service Manual air vent pin holes (2) 2. Replace the keyboard tray. 3. Reinstall the seven M2 x 4-mm screws that secure the keyboard tray to the system board. Back to Contents Page file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/X200/X200_SERVICE_MANUAL/keytray.htm (3 of 3)6/21/2004 3:03:16 AM...
  • Page 42: Reserve Battery

    Reserve Battery: Dell Latitude X200 Service Manual Back to Contents Page Reserve Battery Dell™ Latitude™ X200 Service Manual Removing the Reserve Battery NOTICE: Disconnect the computer and any attached devices from electrical outlets. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
  • Page 43: Replacing The Reserve Battery

    Reserve Battery: Dell Latitude X200 Service Manual reserve battery cable system board connector reserve battery connector reserve battery 5. Pry the reserve battery free from the bottom case. The reserve battery is attached to the bottom case with a piece of adhesive tape.
  • Page 44 Reserve Battery: Dell Latitude X200 Service Manual file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...Latitude/X200/X200_SERVICE_MANUAL/rsrvbatt.htm (3 of 3)6/21/2004 3:03:17 AM...
  • Page 45: Removing The Speakers

    Speakers: Dell Latitude X200 Service Manual Back to Contents Page Speakers Dell™ Latitude™ X200 Service Manual Removing the Speakers NOTICE: Disconnect the computer and any attached devices from electrical outlets. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
  • Page 46 Speakers: Dell Latitude X200 Service Manual system board connector (1 per speaker) speaker connector (1 per speaker) M2 x 4-mm screw (1 per speaker) speaker cable (1 per speaker) speakers (2) NOTICE: Do not pull on the speaker cable. Pull from the speaker connector to disconnect the cable.
  • Page 47 Speakers: Dell Latitude X200 Service Manual Back to Contents Page file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...Latitude/X200/X200_SERVICE_MANUAL/speakers.htm (3 of 3)6/21/2004 3:03:18 AM...
  • Page 48: Cooling Fan

    Cooling Fan: Dell Latitude X200 Service Manual Back to Contents Page Cooling Fan Dell™ Latitude™ X200 Service Manual Removing the Cooling Fan NOTICE: Disconnect the computer and any attached devices from electrical outlets. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
  • Page 49 Cooling Fan: Dell Latitude X200 Service Manual cooling fan connector cooling fan cable cooling fan M2 x 3-mm screws (4) system board connector 8. Remove the tape that secures the cooling fan cable to the fan. NOTICE: Do not pull on the cooling fan cable. Pull from the cooling fan connector to disconnect the cable.
  • Page 50 Cooling Fan: Dell Latitude X200 Service Manual Back to Contents Page file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Latitude/X200/X200_SERVICE_MANUAL/fan.htm (3 of 3)6/21/2004 3:03:18 AM...
  • Page 51: Removing The System Board

    System Board: Dell Latitude X200 Service Manual Back to Contents Page System Board Dell™ Latitude™ X200 Service Manual Removing the System Board NOTICE: Disconnect the computer and any attached devices from electrical outlets. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
  • Page 52 System Board: Dell Latitude X200 Service Manual system board M2 x 4-mm screws (4) status light (LED) cable ZIF connector 11. Disconnect the left and right speakers from their system board connectors. 12. Disconnect the reserve battery connector from the system board connector.
  • Page 53: Replacing The System Board

    System Board: Dell Latitude X200 Service Manual Replacing the System Board Install the modem daughter card that you removed from the old system board in the replacement system board. 2. Place the system board in the bottom case. NOTE: Route cables so that they will not be crimped or pinched when the complete assembly is put back together.
  • Page 54: Modem Daughter Card

    Modem Daughter Card: Dell Latitude X200 Service Manual Back to Contents Page Modem Daughter Card Dell™ Latitude™ X200 Service Manual Removing the Modem Daughter Card NOTICE: Disconnect the computer and any attached devices from electrical outlets. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
  • Page 55 Modem Daughter Card: Dell Latitude X200 Service Manual modem daughter card modem connector modem cable pull tab M2 x 4-mm screw Replacing the Modem Daughter Card 1. Connect the modem cable to the modem. NOTICE: The connectors are keyed for correct insertion; do not force the connections.
  • Page 56 Modem Daughter Card: Dell Latitude X200 Service Manual Back to Contents Page file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/L...k/Latitude/X200/X200_SERVICE_MANUAL/modem.htm (3 of 3)6/21/2004 3:03:20 AM...
  • Page 57: Battery Latches

    Battery Latches: Dell Latitude X200 Service Manual Back to Contents Page Battery Latches Dell™ Latitude™ X200 Service Manual Removing the Battery Latches NOTICE: Disconnect the computer and any attached devices from electrical outlets. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
  • Page 58 Battery Latches: Dell Latitude X200 Service Manual 1 battery lock latch 2 snap tabs (3 per latch button) 3 battery latch release 4 spring 5 bottom case Replacing the Battery Latches 1. Snap in the new latch button from behind the bottom case, making certain that the snap tabs are fully engaged in the latch.
  • Page 59 Battery Latches: Dell Latitude X200 Service Manual file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...Latitude/X200/X200_SERVICE_MANUAL/batlatch.htm (3 of 3)6/21/2004 3:03:20 AM...
  • Page 60: Flashing The Bios

    Dell™ Latitude™ X200 Service Manual To update the basic input/output system (BIOS): 1. Go to support.dell.com. If this is your first time to use the website, complete the one-time registration. 2. Enter the service tag sequence for your computer or select the appropriate Dell™ computer.
  • Page 61: Usb Connector

    Pin Assignments for I/O Connectors: Dell Latitude X200 Service Manual Back to Contents Page Pin Assignments for I/O Connectors Dell™ Latitude™ X200 Service Manual Pin Assignments for the Computer Pin Assignments for the Media Base Pin Assignments for the Computer...
  • Page 62: Ieee 1394 Connector

    Pin Assignments for I/O Connectors: Dell Latitude X200 Service Manual Signal Signal CRT_VCC GREEN BLUE DAT_DDC2 HSYNC VSYNC CLK_DDC2 IEEE 1394 Connector file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/X200/X200_SERVICE_MANUAL/pinouts.htm (2 of 9)6/21/2004 3:03:22 AM...
  • Page 63: Docking Connector

    Pin Assignments for I/O Connectors: Dell Latitude X200 Service Manual TPA- TPB- P12V TPB+ TPA+ Pin Assignments for the Media Base Docking Connector Signal Signal DCK3_DOCK_IN2 P3.3V_LAN KBC3_DCKRST FDD3_STEP ADID PS25_KCLK DCK_DCIN FDD3_WGATE PIO3_STROBE PS25_KDATA VGA3_RED FDD3_WP PIO3_ACK PS25_MCLK file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/X200/X200_SERVICE_MANUAL/pinouts.htm (3 of 9)6/21/2004 3:03:22 AM...
  • Page 64 Pin Assignments for I/O Connectors: Dell Latitude X200 Service Manual VGA3_GREEN FDD3_HDSEL PIO3_BUSY PS25_MDATA VGA3_BLUE PIO3_PE SIO3_DTR1 VGA5_DDCD 1394_TPB- SIO3_TXD1 VGA5_DDCC 1394_TPB+ PIO3_SLCT SIO3_RTS1 VGA5_HSYNC PIO3_AUTOFD VGA5_VSYNC 1394_TPA- PIO3_ERROR SIO3_CTS1 1394_TPA+ PIO3_INIT SIO3_RI1 KBC3_EJECT PIO3_SLCTIN SIO3_RXD1 CHP3_DCKSTS DCK5_SPKR_MUTE SIO3_DSR1 USB3_P2+...
  • Page 65 Pin Assignments for I/O Connectors: Dell Latitude X200 Service Manual PIO3_PD(6) USB3_P5- FDD3_TRK0 LAN3_RX- PIO3_PD(7) FDD3_RDATA USB3_P4+ LAN3_TX+ LAN3_EECLK USB3_P4- FDD3_J3MODE LAN3_TX- LAN3_DTOEE FDD3_DS0 LAN3_DFRMEE KBC3_DCKPWRON FDD3_MTR0 DCK3_DOCK_IN1 PS/2 Connector Signal DAT_KBD DAT_SM1 PS2VCC CLK_KBD file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/X200/X200_SERVICE_MANUAL/pinouts.htm (5 of 9)6/21/2004 3:03:22 AM...
  • Page 66 Pin Assignments for I/O Connectors: Dell Latitude X200 Service Manual CLK_SM1 USB Connector Signal -Data +Data Ground IEEE 1394 Connector TPB- TPB+ file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/X200/X200_SERVICE_MANUAL/pinouts.htm (6 of 9)6/21/2004 3:03:22 AM...
  • Page 67: Serial Connector

    Pin Assignments for I/O Connectors: Dell Latitude X200 Service Manual TPA- TPA- Serial Connector Signal Signal RXDA TXDA Parallel Connector file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/X200/X200_SERVICE_MANUAL/pinouts.htm (7 of 9)6/21/2004 3:03:22 AM...
  • Page 68 Pin Assignments for I/O Connectors: Dell Latitude X200 Service Manual Signal Signal STRB#/5V ACK#/DRV# PD0/INDEX# BUSY/MTR# PD1/TRK0# PE/WDATA# PD2/WP# SLCT/WGATE# PD3/RDATA# AUTOFD# PD4/DSKCHG# ERROR#/HDSEL# PD5F INIT#/DIR# PD6F SLCT_IN/#STEP# PD7F 18-25 Video Connector file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/X200/X200_SERVICE_MANUAL/pinouts.htm (8 of 9)6/21/2004 3:03:22 AM...
  • Page 69 Pin Assignments for I/O Connectors: Dell Latitude X200 Service Manual Signal Signal CRT_VCC GREEN BLUE DAT_DDC2 HSYNC VSYNC CLK_DDC2 Back to Contents Page file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Latitude/X200/X200_SERVICE_MANUAL/pinouts.htm (9 of 9)6/21/2004 3:03:22 AM...