To disable tray linking, set the Paper Size and Paper Type to a unique value in each one of the trays. If all trays do not have the same type of print media

when linked, you could mistakenly print a job on the wrong paper type.

Using the Duplex Function

Duplex printing (or two-sided printing) allows you to print on both sides of a sheet of paper. For sizes that are acceptable for duplex printing, see

Sizes and

Support."

Using Duplex Bind

When using duplex bind printing in the printer driver, you must select either Flip on Short Edge or Flip on Long Edge. Binding in the Duplex menu item defines

the way duplexed pages are bound, and how the printing on the back of the sheet (even-numbered pages) is oriented in relation to the printing on the front

(odd-numbered pages).

The two values for Binding are:

Long

Assumes binding along the long edge of the page (left edge for portrait orientation and top edge for landscape orientation). The following

Edge

illustration shows long-edge binding for portrait and landscape pages:

Short

Assumes binding along the short edge of the page (top edge for portrait orientation and left edge for landscape orientation). The following

Edge

illustration shows short-edge binding for portrait and landscape pages:

NOTE:

When you print on both sides of postcard-size paper, make sure the paper is not curled.