Dell 3100cn Color Laser Printer User Manual page 126

C5
Feed paper from the tray loaded with C5 (162 x 229 mm).
LP 210x900
Feed paper from the tray loaded with LP210x900 (210 x 900 mm).
MxNmm
Feed paper from the tray loaded with MxN mm defined by users.
Possible range specified:
Width: 90.0 to 215.9 mm
Length: 139.7 to 355.6 mm
MxNin
Feed paper from the tray loaded with MxNinches defined by users
Possible range specified:
Width: 3.54 to 8.50 inches
Length: 5.50 to 14.0 inches
If this option is not specified or the tray specified is not available, feed paper from the default tray.
-t
Turns on the save toner mode for printing. The print result will be fainter than that of normal printing. In some cases, this option will be ignored.
-r
Rotates the image by 90o and uses the paper in the landscape orientation
-n
Disables the addition of the showpage. It is used when files converted to the PostScript language program are merged with files created with other
applications.
-l=left,bottom
Specifies the print position. Printing will be executed from the left and bottom of the page. The default is 0.25 inches for both left and bottom.
-s=width,height
Specifies the output size. Printing will be executed with the width and height in inches.
-S=width
Sets the width of the output size in inches. The height will be calculated automatically according to the width.
-E
This function turns on the image enhancement function. In some cases, this option will be ignored.
-Nc=copies
Specifies the number of output copies (the value of copies must be a positive integer).
-Hd=position:format
Specifies the position to be output the user information as the header or footer.
position specifies output position. But this option is available only for converting text files.
ul
Output on the upper left corner of the paper.