Dell 3100cn Color Laser Printer User Manual page 34

Purpose:
To print a list of all files that are stored as Secure and Proof Print in the RAM Disk.
Network
Use the Network menu to change printer settings affecting jobs sent to the printer through a network port.
Ethernet
Purpose:
To specify the communication speed and the duplex settings of Ethernet.
The change becomes effective after the printer is turned off and then on again.
Values:
Detects the Ethernet settings automatically.
Auto*
Uses 10base-T half-duplex.
10Base Half
Uses 10base-T full-duplex.
10Base Full
Uses 100base-TX half-duplex.
100Base Half
Uses 100base-TX full-duplex.
100Base Full
TCP/IP
Purpose:
To specify the TCP/IP settings.
The change becomes effective after the printer is turned off and then on again.
Values:
Automatically sets the IP address.
IP AddressSetup AutoIP*
Uses BOOTP to set the IP address.
BOOTP
Uses RARP to set the IP address.
RARP
Uses DHCP to set the IP address.
DHCP
Enables the IP address entered on the operator panel.
Panel
Displays the IP address allocated to the printer by using the keys on the operator panel.
IP Address
Displays the subnet mask.
Subnet Mask
Displays the gateway address.
Gateway Address