10. Specify the directory to install the utility. To install into /usr/local/dellbin3100cn, press the <Enter> key. To change the directory, specify one.

Enter Binary directory name? [/usr/local/dellbin3100cn] :

11. If this utility has been installed earlier, the user will be prompted whether to overwrite the earlier version.

directory is '/usr/local/dellbin3100cn' (y/n)[n] : y

12. If the server input at step 5 the printer connected by the network, type <y>. If the server and the printer are connected locally, type <n>.

'dell3100cn'is network printer?:(y/n)[y] : y

13. When the other filters have been registered in your workstation, the following message appears. Type <y>.

Do you want remove 'XXXXXX' filter and re-install (y/n) [y]

The software installation is complete.

NOTICE:

When the printing settings are modified or changed by the Administration Tool (admintool) after the installation, printing may not work.

Operation on HP-UX

Installation Procedure

NOTE:

The host name of the output printer which you want to specify in step 6 must be pre-registered with a sam command.

1. Insert the Drivers and Utilities CD into the CD-ROM drive of the local workstation.

2. Log on as a root account and extract the installation script from the Drivers and Utilities CD.

NOTICE:

If you have no root privilege, contact your system administrator.

# mount -F cdfs -o cdcase /dev/dsk/c1t2d0 /cdrom

# cd /tmp

# cp /cdrom/UNIXFilter/HP-UX/UXFILTER.tar /tmp

# tar xvf UXFILTER.tar

NOTE:

/dev/ds/clt2d0 is an example. Specify the CD-ROM device file for all workstations.

3. Type ./install.sh and run the installer.

# ./install.sh

4. Select the printer model to install.

Printer Model ?

1. Dell Laser Printer 3100cn

2. Exit

Enter Process No (1/2)? : 1

5. Specify the directory to install the utility.

Enter install directory name /usr/local/dellbin3100cn] :

directory is '/usr/local/dellbin3100cn' (y/n)[n]: y

6. Type the name of the output printer. Type delllp3100cn. Type the printer name to be registered with the system.

Enter output-printer-name? : delllp3100cn

output-printer-name is 'delllp3100cn' (y/n)[y]: y

NOTE:

The registered printer name can be verified by executing lpstat -v.

7. Type the logical printer name. Register dell3100cn. Type a printer name that has not already been registered with the system.

Enter logical-printer-name? : dell3100cn

Printer-name is 'dell3100cn' (y/n)[y]: y

8. The utility will be installed in the directory specified at step 5. Registration will be executed here so that the logical printer registered at step 7 can

Table of Contents