Dell 3100cn Color Laser Printer User Manual page 99

Feed paper from the tray loaded with MxNinches defined by users.
Possible range specified:
Width: 3.54 to 8.50 inches
Length: 5.50 to 14.0 inches
If this option is not specified or the tray specified tray is not available, feed paper from the default tray.
-y toner_save
Turns on the save toner mode for printing. The print result will be fainter than that of normal printing.
-y nc=n
Specifies the number of output copies (the value of copies must be a positive integer). If this option is not specified, 1 will be selected.
-y ps
The input file will be processed as the PostScript file. If the file does not begin with %!, %! will be output to the beginning line. If a file contains %!,
this option will be ignored.
-y msi
Specifies Multipurpose Feeder.
-y m=type
Specifies Multipurpose Feeder Paper Type.
Available Multipurpose Feeder Paper Types are as follows.
B
FinePaper/Bond/Plain Paper 2
BB
FinePaperBack/Bond/Plain Paper 2 - Side 2
P
Stationary/Plain/Plain Paper 1
PB
StationaryBack/Plain/Plain Paper 1 - Side 2
H1
ThickPaper/Heavyweight 1/Covers 1
H1B
ThickPaperBack/Heavyweight 1/Covers 1 - Side 2
H2
ThickPaper2/Heavyweight 2/Covers 2
H2B
ThickPaper2Back/Heavyweight 2/Covers 2 - Side 2
OHP
Transparency
L
LabelPaper/Labels
C1
CoatingPaper1/Coated 1/Coated Paper 1
C1B
CoatingPaper1Back/Coated 1/Coated Paper 1- Side 2
C2
CoatingPaper2/Coated 2/Coated Paper 2
C2B
CoatingPaper2Back/Coated 2/Coated Paper 2 - Side 2
E
Envelope
If this option is not specified, Multipurpose Feeder Paper Type for the printer can be used.
-y mfo=mode
Specifies orientation for Multipurpose Feeder.
Available orientations for Multipurpose Feeder are as follows.
le
Landscape
ler
Landscape (Rotated)
se
Portrait
ser