Enables the long-edge binding feature. When it is specified, the printing direction or position will be adjusted and both sides of the paper printed so that

the longer edge of the pages can be bound. This option is available only when the optional duplex module is installed on the printer.

-Itray-input

Specifies the paper tray.

The parameters to be able to specify are the same as txt2ps2.

-t

Turns on the save toner mode for printing. The print result will be fainter than that of normal printing. In some cases, this option will be ignored.

-E

This function turns on the image enhancement function. In some cases, this option will be ignored.

-Nc=copies

Specifies the number of output copies (the value of copies must be a positive integer).

-ps

The input file will be processed as the PostScript file. If the file does not begin with %!, %! will be output to the beginning line. For files with %!, this option

will be ignored.

-M=type

Specifies Multipurpose Feeder Paper Type.

If this option is not specified, Multipurpose Feeder Paper Type of the printer can be used.

-Mfo=mode

Specifies orientation for Multipurpose Feeder.

-Pon

Specifies Alternate Tray.

-St=mode

Specifies Feed Separators from.

-Sp

Specifies Printed Separators