Fujitsu BX600 User Manual page 89

The following shows how to modify a team.
1
Click the BACS2 "Tools" menu → "Create a Team".
The wizard Welcome screen appears.
2
Click [Next] to continue modifying a team using the wizard or click
[Expert Mode] to work in Expert Mode.
3
Make the desired changes, and then click [OK].
4
Click [Apply].
5
Click [Yes] when the message is displayed indicating that the
network connection will be temporarily interrupted.
Adding a VLAN
You also can add virtual LANs (VLANs) to a team. This enables you to add multiple virtual adapters
that are on different subnets. The benefit of this is that your system can have one network adapter that
can belong to multiple subnets. With a VLAN, you can couple the functionality of load balancing for
the load balance members, and you can employ a failover adapter.
You can define up to 64 VLANs per team (63 VLANs that are tagged and 1 VLAN that is not
tagged). VLANs can only be created when all teams members are Broadcom adapters. If you try to
create a VLAN with a non-Broadcom adapter, an error message is displayed.
The following shows how to configure a team with a VLAN.
1
Click the name of the team you want to configure.
2
From the "Team Properties" tab, click [Add VLAN].
5 Broadcom Advanced Control Suite 2 (BACS2)
E
189