Also See for Fujitsu FMC-16FX FAMILY ADA-16FX-ETHERNET
Fujitsu ADA-16FX User Manual
17 pages
Related Manuals for Fujitsu FMC-16FX FAMILY ADA-16FX-ETHERNET
-
Network Card Fujitsu PCNA EP OCe14102 Installation Manual
(20 pages)
-
Network Card Fujitsu BX600 User Manual
1gbit/s ethernet i/o module (98 pages)
-
Computer Hardware Fujitsu ADA-16FX User Manual
F2mc-16fx family adapter board (17 pages)
Summary of Contents for Fujitsu FMC-16FX FAMILY ADA-16FX-ETHERNET
-
Page 1: User Guide
Fujitsu Microelectronics Europe FMEMCU-UG-960011-10 User Guide F²MC-16FX FAMILY ADAPTER BOARD ADA-16FX-ETHERNET USER GUIDE... -
Page 2: Revision History
ADA-16FX-ETHERNET Revision History Revision History Date Issue 11.01.2008 V1.0, TKi, First Release This document contains 14 pages. UG-960011-10 - 2 - © Fujitsu Microelectronics Europe GmbH... -
Page 3: Warranty And Disclaimer
Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in original packing and without further defects resulting from the customer’s use or the transport. -
Page 4: Table Of Contents
5 CONNECTORS......................10 Ethernet connector (X1) ..................10 Edge Connectors (X2, X3, X11) ................10 6 SILK-PLOT OF THE BOARD ..................11 7 RELATED PRODUCTS ....................12 8 INFORMATION IN THE WWW..................13 UG-960011-10 - 4 - © Fujitsu Microelectronics Europe GmbH... -
Page 5: Overview
< All 100 pins routed to pin-header < On-board 5V and 3V voltage regulators, Power-LED < USB power-supply (external power supply possible) This board must only be used for test applications in an evaluation laboratory environment. © Fujitsu Microelectronics Europe GmbH - 5 - UG-960011-10... -
Page 6: Installation
Attach the adapter board to the evaluation board as shown below. The Ethernet jack has to face to the outer edge. Ethernet jack Note: Make sure to jumper the board to 5V before connecting the ADA-16FX-ETHERNET. UG-960011-10 - 6 - © Fujitsu Microelectronics Europe GmbH... -
Page 7: Jumper Settings Of Ada-16Fx-Ethernet V1.1
JP 3pol. Select center tap B of Ethernet jack solder JP 3pol. Please refer to the documentation of the evaluation board for detailed information about the jumper settings for the SK-16FX-EUROSCOPE (SK-16FX-100PMC). © Fujitsu Microelectronics Europe GmbH - 7 - UG-960011-10... -
Page 8: Jumpers And Led's
By default the pins 4 and 5 of the assembled Ethernet jack are used as center tap pin. This setting depends on the type and manufacturer of the used Ethernet jack (see chapter 5.1). UG-960011-10 - 8 - © Fujitsu Microelectronics Europe GmbH... -
Page 9: Link Led, Activity Led (Link, Act)
These LEDs display the status of the Ethernet interface. Colour Description LINK Green Indicates that a link is established Yellow Indicates activity on the Ethernet By default the LINK LED should light directly after connected to a network. © Fujitsu Microelectronics Europe GmbH - 9 - UG-960011-10... -
Page 10: Connectors
MCU Pins X2 (1 – 20) 1 – 20 X3 (71 – 100) 71 – 100 X11 (51 – 70) 51 – 70 The adapter board is powered via the edge connectors. UG-960011-10 - 10 - © Fujitsu Microelectronics Europe GmbH... -
Page 11: Silk-Plot Of The Board
ADA-16FX-ETHERNET Chapter 6 Silk-Plot of the Board 6 Silk-Plot of the Board Ethernet connector Latch Cirrus CS8900A Latch © Fujitsu Microelectronics Europe GmbH - 11 - UG-960011-10... -
Page 12: Related Products
ADA-16FX-ETHERNET Chapter 7 Related Products 7 Related Products SK-16FX-EUROSCOPE Evaluation board with MB96F348HS < FPT-100P-M20 package ADA-16FX-ETHERNET Adapterboard for SK-16FX-EUROSCOPE < (SK-16FX-100PMC) MB96F348HS MB96340 Series Flash MCU < UG-960011-10 - 12 - © Fujitsu Microelectronics Europe GmbH... -
Page 13: Information In The Www
Datasheets and Hardware Manuals, Support Tools (Hard- and Software) http://mcu.emea.fujitsu.com Linear Products: Power Management, A/D and D/A Converters http://www.fujitsu.com/emea/services/microelectronics/linears/ Media Products: SAW filters, acoustic resonators and VCOs http://www.fujitsu.com/emea/services/microelectronics/saw/ For more information about FUJITSU MICROELECTRONICS http://www.fujitsu.com/emea/services/microelectronics/ © Fujitsu Microelectronics Europe GmbH - 13 - UG-960011-10... - Page 14 According to the European WEEE-Directive and its implementation into national laws we take this device back. For disposal please send the device to the following address: Fujitsu Microelectronics Europe GmbH Warehouse/Disposal Monzastraße 4a D-63225 Langen Germany UG-960011-10 - 14 - © Fujitsu Microelectronics Europe GmbH...