Fujitsu BX600 User Manual page 53

Message
Number
17 Unknown PHY detected.
Using a default PHY
initialization routine.
18 This driver does not
support this device.
Upgrade to the latest
driver.
19 Driver initialization failed.
4.9.3 Intermediate Driver (Virtual Adapter/Team)
The intermediate driver is identified by BLFM regardless of the base driver revision. "• Intermediate
Driver Event Log Messages" ( pg.153) lists the event log messages supported by the intermediate
driver, explains the cause for the message, and provides the recommended action.
• Intermediate Driver Event Log Messages
Message
Number
1 Unable to register with
NDIS.
2 Unable to instantiate the
management interface.
3 Unable to create
symbolic link for the
management interface.
4 Broadcom Advanced
Server Program Driver
has started.
5 Broadcom Advanced
Server Program Driver
has stopped.
6 Could not allocate
memory for internal data
structures.
Message
The driver could not read
the PHY ID.
The driver does not
recognize the installed
adapter.
Unspecified failure during
driver initialization.
Message
The driver cannot
register with the NDIS
interface.
The driver cannot create
a device instance.
Another driver has
created a conflicting
device name.
The driver has started.
The driver has stopped.
The driver cannot
allocate memory from
the operating system.
Cause Corrective Action
Replace the adapter.
Upgrade to a driver
version that supports this
adapter.
Reinstall the driver, update
to a newer driver, run
BACS2 diagnostics, or
replace the adapter.
Cause Corrective Action
Unload any NDIS
drivers.
Reboot the operating
system.
Unload the conflicting
device driver that uses
the name "Blf".
Informational message
only.
No action is required.
Informational message
only.
No action is required.
Close running
applications to free
memory.
4 Broadcom Gigabit Ethernet Teaming Services
E
153