4
Remove the top cover.
→
"7.2 Removing and Attaching the Top Cover" in "Server Blade User's Guide"
5
Install the 1Gbit/s Ethernet I/O Module.
Make sure the 1Gbit/s Ethernet I/O Module is securely on the slot.
1Gbit/s Ethernet
I/O Module
6
Secure the 1Gbit/s Ethernet I/O Module with the screws.
Secure the 1Gbit/s Ethernet I/O Module with the three screws included with this product.
7
Attach the top cover.
→
"7.2 Removing and Attaching the Top Cover" in "Server Blade User's Guide"
8
Install the server blade to the chassis.
→"4.2 Installing Server Blades" in "Blade Server System Unit Hardware Guide"
Expansion board slot
Screws
[Rear]
2 Installing a 1Gbit/s Ethernet I/O Module
E
117