5.4.2
Resources
The following information can be checked on the "Resources" tab.
Some information may not be available for all network adapters.
Item
Bus Type
Bridge
Bridge Lanes
Bridge Speed
Slot No
Bus Speed (MHz)
Bus Width (bit)
Bus No
Device No
Function No
Interrupt Request
Memory Address
The type of input/output (I/O) interconnect used by the adapter
The bridge type, which is the PCI-E to PCI-X bridge.
The number of PCI-E lanes connected to the bridge.
The clock speed on PCI-E bus.
The slot number on the system board occupied by the adapter.
The bus clock signal frequency used by the adapter.
The number of bits that the bus can transfer at a single time to and from the
adapter.
Indicates the number of the bus in which the adapter is installed
The number assigned to the adapter by the operating system
The port number of the adapter. For a single-port adapter, the function number
is 0. For a two-port adapter, the function number for the first port is 0, and the
function number for the second port is 1.
The interrupt line number that is associated with the adapter. Valid numbers
range from 2 to 25.
The memory mapped address that is assigned to the adapter. This value can
never be 0.
Description
5 Broadcom Advanced Control Suite 2 (BACS2)
E
165