Installing The Bacs2 - Fujitsu BX600 User Manual

5.2

Installing the BACS2

If [Broadcom Control Suite 2] is not displayed in the "Control Panel", install BACS2 according to the
following installation procedures:
Ensure that this product is installed in the Server Blade before installing BACS2.
Before you begin the installation, close all applications, windows, or dialog boxes.
To use TCP/IP Offload Engine (TOE), you must have Windows Server 2003 with Scalable
Networking Pack (SNP)
The installer checks if SNP for Windows Server 2003 is installed on the machine.
If it is installed, the installer installs the NDIS 5.2 driver, which is necessary in order to
use TOE. If SNP for Windows Server 2003 is not installed on the machine,
the installer will install the NDIS 5.1 driver, a user cannot use TOE.
Get the Broadcom Control Suite from the ServerStart CD-ROM included with the
BX620 S4 server blade and install.
If using Broadcom, refer to the operation manual or help file included with the driver.
158