5 Remove the memory module from the memory-module connector.
1
memory-module connector
3
memory module
Replacing the Memory Module(s)
CAUTION:
memory module in the connector labeled
module in the connector labeled
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the notch on the memory module with the tab in the memory
module connector.
3 Slide the memory module firmly into the memory-module connector at a
45-degree angle, and press the memory module down on both sides until it
clicks into place. If you do not hear the click, remove the memory module
and reinstall it.
18
Memory
1
If you need to install memory modules in two connectors, install a
3
2
2
securing clips (2)
DIMM A
before you install a memory
DIMM B
.