Camera Module; Removing The Camera Module - Dell Inspiron 13z Owner's Manual

Camera Module

WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery
(see "Removing the Battery" on page 13) before working inside the computer.

Removing the Camera Module

1 Follow the instructions in "Before You Begin" on page 9.
2 Follow instructions from step 2 to step 13 in "Removing the Display
Assembly" on page 42.
3 Remove the display bezel. See "Removing the Display Bezel" on page 44.
4 Remove the display panel. See "Removing the Display Panel" on page 45.
5 Disconnect the camera module cable from the connector on the camera
module.
10
Camera Module
51