1
2
1
tape
Replacing the Display Panel
1 Follow the instructions in "Before You Begin" on page 9.
2 Replace the six screws (three on each side) that secure the
display-panel brackets to the display panel.
3 Connect the display cable to the display-board connector on the back of
the display panel and secure it with the tape.
4 Align the display panel on the display cover.
5 Replace the four screws that secure the display panel to the display cover.
6 Replace the display bezel. See "Replacing the Display Bezel" on page 45.
7 Replace the display assembly. See "Replacing the Display Assembly" on
page 44.
2
display cable connector
47
Display