1
speaker cable connector
10 Remove the speaker modules from the computer base.
Replacing the Speakers
1 Follow the instructions in "Before You Begin" on page 9.
2 Route the speaker cable on the computer base.
3 Align the speaker modules using the alignment post on the computer base.
4 Connect the speaker cable to the connector on the I/O board.
5 Replace the system board. See "Replacing the System Board" on page 60.
6 Replace the wireless Mini-Card. See "Replacing the Mini-Card" on
page 36.
7 Replace the palm-rest assembly. See "Replacing the Palm-Rest Assembly"
on page 32.
8 Replace the keyboard. See "Replacing the Keyboard" on page 27.
76
Speakers
1
2
2
speakers (2)