Connecting A Footswitch/Foot Controller ([Aux Pedal] Jack); Connecting A Microphone Or Guitar ([Mic./Line In] Jack) - Yamaha Clavinova CVP-609 Owner's Manual

Connecting a Footswitch/Foot Controller ([AUX
PEDAL] jack)
Optional footswitches (Yamaha FC4 or FC5) and an optional Foot controller (Yamaha
FC7) can be connected to the [AUX PEDAL] jack. A footswitch can be used for
switching functions on and off, while a foot controller controls continuous parameter
such as volume.
Foot Pedals
Footswitch FC4
(optional)
 Example 1: Using a foot controller to control the volume of the
performance data played on the keyboard.
Connect the FC7 foot controller to the [AUX PEDAL] jack. With the initial factory
settings, no special setup is necessary.
 Example 2: Using a footswitch to control Song Start/Stop.
Connect a footswitch (FC4 or FC5) to the [AUX PEDAL] jack.
To assign the function to the connected pedal, select "Song Play/Pause" in the operation
display: [Menu] → [Assignable] → [Pedal].
Connecting a Microphone or Guitar ([MIC./LINE
IN] jack)
To the [MIC./LINE IN] jack (standard 1/4" phone jack), you can connect a microphone,
guitar, or other various equipment. For instructions on connecting a microphone, refer
to page 71.
Note that you need to select "MIC" or "LINE IN" depending on the connected
equipment. When the output level of the connected equipment (such as a microphone,
guitar, bass) is low, set the [MIC. LINE] switch to "MIC. " When the output level of the
connected equipment (such as a synthesizer, keyboard, CD player) is high, set the [MIC.
LINE] switch to "LINE. "
Footswitch FC5 Foot Controller FC7
(optional) (optional)
NOTE
Do not connect or disconnect
the pedal when the power is
on.
CVP-609/605 Owner's Manual 87