Converting A Midi Song To An Audio Song - Yamaha Clavinova CVP-609 Owner's Manual

Converting a MIDI Song to an Audio Song

You can convert a recorded MIDI Song in the User memory or USB flash memory to an
Audio Song by playing back. Conversion is executed by playing back the MIDI Song and
re-recording it as an Audio Song. By default, the converted data is saved in WAV format,
in the same way as Audio recording (page 66).
1
Connect the USB flash memory (to which the Audio Song is to be
saved) to the [USB TO DEVICE] terminal.
2
Call up the Song Selection display which contains the MIDI Song to be
converted.
3
Touch [File] to call up the File Management icons.
3
4
Enter a checkmark to the MIDI Song to be converted.
5
Touch (Audio Convert) to call up the Song Selection display for
selecting the Save destination.
6
Specify the Save destination location.
You can add a new folder by touching
7
Touch [ConvertHere] to start conversion.
This operation starts playback and conversion from MIDI to audio. If you play the
keyboard or input audio signals via a microphone or the [AUX IN] jack during
conversion, the sound also will be recorded.
When conversion is completed, the message indicating that the conversion is being
executed will no longer be shown in the display, and the newly created new Audio
Song is shown in the Song Selection display.
70 CVP-609/605 Owner's Manual
4
(New Folder)
NOTE
Before using a USB flash
memory, be sure to read
"Connecting USB Devices" on
page 88.
5
NOTE
Audio Conversion can only be
done one file at a time.