Yamaha Clavinova CVP-409 Installation Procedure

Yamaha Clavinova CVP-409 Installation Procedure

Hide thumbs Also See for Clavinova CVP-409:

Advertisement

CVP-409/407/405/403/401, CGP-1000 Installation Procedure
Caution:
Do not turn off the power or remove the USB media during this operation.
1

Downloading the firmware

1)
Download the Zip file.
2)
Extract the six files included in the Zip file.
3)
Insert the USB device into your computer.
4)
Copy the extracted files into the root directory of the USB device.
2

Connecting the USB device

Connect the USB device containing the appropriate upgrade data
to the USB TO DEVICE terminal on the instrument.
Caution:
Make sure that the USB device is connected properly to the
terminal. Do not try to force an incorrect connection; doing so
may damage the terminal.
3

Installing the upgrade program

Simultaneously hold down the
the power.
Keep holding down the [START/STOP] button until the following display is shown.
After a few moments, the following display appears.
4

Executing the installation

Press
[START/STOP] button
installation.
[START/STOP] button
Press the [START/STOP] button to start installation.
Go on to
step
Press the [BREAK] button to delete the data the upgrade
data in the USB device.
Go on to
step
to start the
in the STYLE CONTROL section and turn on
4. (Executing the installation).
When the installation is completed, the
following display appears.
Turn off the power switch on the instrument.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Clavinova CVP-409 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Clavinova cvp-407Clavinova cvp-405Clavinova cvp-403Clavinova cvp-401Clavinova cgp-1000

Table of Contents