Display-Based Controls - Yamaha Clavinova CVP-609 Owner's Manual

Display-based Controls

The display of this instrument is a special touch screen that allows you to select or
change the desired parameter by simply touching the corresponding setting on the
display.
Using the Display (Touch Screen)
 Touch
To select an item, lightly touch the
corresponding indication on the display.
 Slide
Hold down the display slider, then slide
your finger vertically or horizontally to
change the parameter value.
 Rotate
Touch and hold the display knob, and
rotate your finger around the knob to
change the parameter value.
 Touch and hold
This instruction means to touch the
object in the display and hold it for a
while.
When setting values by using []/[], a
slider or a knob, you can restore the
default value by touching and holding
the value on the display.
Display
Data dial
[HOME] button
NOTICE
Do not use any sharp or hard
tools to operate the touch
screen. Doing so may
damage the display.
NOTE
Keep in mind that operation by
simultaneously touching two or
more points on the display is
not possible.
NOTE
You can turn on/off system
sounds produced when
touching the display from
[Menu]  [Utility]  [Display]
 Touch Panel [Sound]
CVP-609/605 Owner's Manual 25