Connecting A Footswitch/Foot Controller (Foot Pedal Jacks) - Yamaha PSR-S670 Owner's Manual

Connecting a Footswitch/Foot Controller (FOOT PEDAL jacks)

The FC4/FC4A or FC5 footswitches and the FC7 foot controller (sold separately) can be connected to one of the
FOOT PEDAL jacks. A footswitch can be used for switching functions on and off, while a foot controller controls
continuous parameters such as volume.
Foot Pedals
FC4/FC4A
By default, each jack features the following function.
• FOOT PEDAL [1] .... Switches sustain on or off. Connect an FC4/FC4A or FC5
• FOOT PEDAL [2] .... Controls volume. Connect an FC7 foot controller to this
You can also change the function assignments to the pedals as desired.
For information on functions that can be assigned to the pedals, refer to the
Reference Manual on the website.
• Example: Controlling Song Start/Stop by footswitch
Connect a footswitch (FC4/FC4A or FC5) to one of the FOOT PEDAL jacks.
To assign the function to the connected pedal, press the [1 ] (SONG PLAY/
PAUSE) button in the operation display: [FUNCTION]  TAB [E] MENU 1 
Cursor buttons [][][E][F] CONTROLLER  [ENTER]  TAB [F] FOOT
PEDAL.
Advanced Features
Refer to the Reference Manual on the website, Chapter 9.
Assigning specific functions to each foot
pedal:
90
PSR-S670 Owner's Manual
FC5 FC7
footswitch to this jack.
jack.
[FUNCTION]  MENU 1 CONTROLLER  [ENTER] 
FOOT PEDAL
NOTE
Do not connect or disconnect the
pedal when the power is on.