Yamaha Clavinova CVP-609 Owner's Manual page 43

 Using the panel buttons
1-1
To select the keyboard part, press the VOICE [MAIN/LAYER/LEFT]
button repeatedly if necessary until the desired part's lamp lights.
1-1
1-2
Press one of the desired VOICE category buttons to call up the Voice
Selection display.
2
Touch the desired Voice.
To hear the characteristics of the Voices:
Touch (Demo) to start demo playback of the selected Voice. Touch
stop playback.
Touch (Information) to call up the Voice Information window, which may or may not be
available depending on the Voice.
3
Make sure that the desired keyboard part is turned on.
The on/off setting for the keyboard part can be made as described in step 1-1 in
"Touching the display" above.
4
Play the keyboard.
NOTE
You can select Voices for the
Main and Layer parts simply
by using the Voice category
selection buttons. While
holding down one of the Voice
category selection buttons,
press another Voice category
1-2
selection button. The Voice
corresponding to the first
pressed button is assigned to
the Main part while the Voice
of the second pressed button
is assigned to the Layer part.
NOTE
For information about Voices in
the "Others" tab, refer to the
Reference Manual on the
website.
NOTE
You can play the Demo also by
(Demo) again to
touching the Demo icon which
appears in the Information
window.
CVP-609/605 Owner's Manual 43