Recalling A Registered Panel Setup - Yamaha Clavinova CVP-609 Owner's Manual

Recalling a Registered Panel Setup

The saved Registration Memory Bank files can be recalled by using the REGIST BANK
[-]/[+] buttons or the following procedure.
1
Call up the Registration Bank Selection display (step 1 on page 79).
2
Touch and select the desired Bank on the display.
You can also use the REGIST BANK [-]/[+] buttons to select a Bank.
3
Press one of the green-lit numbered buttons ([1] – [8]) in the
Registration Memory section.
Confirming the Registration Memory Information
You can call up the information display to confirm which Voices and Style are
memorized to the [1] – [8] buttons of a Registration Memory Bank.
1
Call up the Registration Bank Selection display, then select the desired
Bank.
2
Touch (Information) to call up the Registration Information
window.
This display consists of two pages: Voice-related and Style-related. You can
alternate between the two via []/[].
To change the name of the selected Registration, touch
selected Registration, touch
Naming the Registration Memory data
If you have created a wide variety of Registration Setups, it may be difficult to find the one
desired for your particular live performance situation.
To remedy this, it is good idea to assign names to both the Registration Memory Bank and its
Registration Setups individually.
80 CVP-609/605 Owner's Manual
(Rename). To delete the
(Delete).
NOTE
• When recalling setups that
include Song, Style or text
files selected from a USB
flash memory, make sure
that the appropriate USB
flash memory containing the
registered Song, Style or
text is connected into the
[USB TO DEVICE] terminal.
• Before using a USB flash
memory, be sure to read
"Connecting USB Devices"
on page 88.
• You can also call up the
eight setups by using
pedals in any order you
specify via [Menu] 
[RegistSeq].
For details, refer to the
Reference Manual on the
website.
For switching the
pages.
NOTE
If a certain Voice part is set to
off, the Voice name for the
corresponding part is shown in
gray.