Replacing The Graphics-Card Heat Sink Fan; Procedure; Postrequsites - Alienware M17x R4 Owner's Manual

14
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.

Procedure

1 Align the screw holes on the graphics-card heat sink fan with the screw holes on the
chassis.
2 Tighten the captive screws that secure the graphics-card heat sink fan to the
chassis.
3 Connect the graphics-card heat sink fan cable to the connector on the system board.

Postrequsites

1 Replace the compartment door. See "Replacing the Compartment Door" on page 15.
2 Replace the battery pack. See "Replacing the Battery Pack" on page 13.
3 Follow the instructions in "After Working Inside Your Computer" on page 11.
28
|

Replacing the Graphics-Card Heat Sink Fan

Replacing the Graphics-Card
Heat Sink Fan
Before working inside your computer, read the safety