Table of Contents
Advertisement
ErgoPro m664
Architecture & Configuration of m664-series
Chip set
Memory banks
SIMM modules per
bank
DIMM modules per
bank
BIOS
Keyboard controller
Theft prevention
Power Management
Desktop Management
Floppy drive
Architecture /
Expansion slots
Mass memory bays
HD silencer
Power supply
Fans
Dimensions
Width
Heigth
Depth
Weigth
Page 9-4
m664/233, m664/266, m664/300, m664/333
Intel 440LX AGPset (i.e. 82443LX and 82371AB)
256 kB (i.e. 2 Mb) Boot Block Flash RAM, Intel/Phoenix platform with PnP
(1.0A), ACPI (1.0) and PCI (2.1) support
Industry standard (AMI), built-in PC97307
Yes, APM rev. 1.2 compliant (Windows 95), ACPI 1.0 compliant (future
Yes, a place for one 3.5" floppy drive, BIOS support: 720kB, 1.44MB and
2.88MB (3.5"), 360kB and 1.2MB (5.25")
one shared PCI/ISA (32 bit / 16 bit),
A 3.5" device bay for three 3.5" devices (one of them occupied by Floppy
drive), two devices attached to the 3.5" bay are front accessible.
A 5.25" device bay for three 5.25" or 3.5" devices. Attaching the 3.5" device to
the 5.25" bay requires rails (not supplied by Fujitsu). All devices attached to the
5.25" bay are front accessible.
235 W ATX-style, 110/240 V, 48 Hz to 63 Hz, Power Supply Unit has a
Two temperature controlled fans, one in front panel (air in to the housing),
another one in the PSU (air out from the PSU/housing).
PC Specialist's Handbook
3, with SDRAM support
Not available
1
No
Windows 9x)
Yes, DMI 2.0
Slots on the system board:
one AGP (32-bit),
three PCI (32 bit),
two ISA (16-bit)
No
monitor outlet connector
190 mm
440 mm
480 mm
13 kg (approx.)
Edition 1 - Release 1 - March 1998
Advertisement
Table of Contents
