Fujitsu PenCentra 200 User Manual page 119

remote connection
A connection between your PenCentra 200 and a remote computer. You make a remote
connection by using a modem or an Ethernet card.
Remote Networking
The Windows CE folder where you establish a dial-up connection between a mobile
device and a remote computer.
reset
Depending on the state of your PenCentra 200, a process that either causes the system to
reboot or erases all data stored in RAM.
restore
To return your PenCentra 200 to the state it was in when it was backed up. This involves
copying your backup data to your PenCentra 200.
serial cable
A cable to connect your PenCentra 200 to your desktop computer.
serial connection
A connection between your PenCentra 200 and a desktop computer or external modem by
means of a serial cable.
slider
The vertical double bar on the command bar used to switch between displaying toolbar
buttons and menu names.
stylus
A pointing device, similar to a pen, used to make selections (tap) and enter information on
the touch screen.
synchronization
The process of comparing the data on your PenCentra 200 with the corresponding data on
your desktop computer and updating either computer with the most up-to-date data.
synchronization service
A service in Windows CE Services that allows for synchronization of specific items
between the PenCentra 200 and desktop computer. You can synchronize appointments,
contacts, tasks, e-mail messages, and files.
TCP/IP
(Transmission Control Protocol/Internet Protocol)
The protocol that your PenCentra 200 uses to communicate remotely.
toolbar
A bar at the top of the screen that contains buttons that perform specific tasks.
Glossary 107