Using The Hotpads - Fujitsu PenCentra 200 User Manual

Using the Hotpads

The PenCentra 200 hotpads are arranged vertically on the left-hand side of the
screen. The following table identifies each hotpad on the PenCentra 200, and offers a
description of its use.
Icon
Right Mouse
Button Hotpad
Table 2-2
Name
This hotpad changes the LCD backlight brightness by
cycling through the following states:
Color Reflective LCD (outdoor/indoor display):
Low ->Medium ->High ->Off -> Low...
Backlight
Brightness
Color Transmissive LCD (indoor display):
Hotpad
Very Low -> Low -> Medium -> High -> Very Low...
The hotpad defaults to whatever level was set when the
system was suspended. This hotpad does not repeat if
held down.
When tapped, LCD contrast becomes lighter by one
Increase
step. The contrast range is 16 steps.
Contrast
Hotpad
This hotpad repeats if held down.
When tapped, LCD contrast becomes darker by one
Decrease
step. The contrast range is 16 steps.
Contrast
Hotpad
This hotpad repeats if held down.
Tapping this hotpad causes the next pen tap to be
interpreted by the system as a right-mouse click. All
subsequent taps are interpreted as left-mouse clicks,
unless preceded by a tap of this hotpad.
This hotpad adjusts the volume of the signal fed to the
internal speaker and the headphone jack. This hotpad
cycles through the following states:
Volume
Hotpad
High -> Medium -> Low -> Off -> High...
This hotpad does not repeat if held down.
PenCentra 200 Hotpads
Description
Using the Hotpads
2
23